Mundhiri Parappu Pakora

Use the same weight; it is the same ingredient under another name.

Use about 3 g baking powder for 1 g bicarbonate of soda; it already contains acid, so expect slight extra rise and a different taste in baking.

Only for soaking or tenderising, not baking; use enough to cover and expect a much weaker effect.

Use 120% of the weight; melt gently over low heat to avoid burning the milk solids, which will yield a softer, creamier richness rather than a nutty aroma.

Use 85% of the weight; holds high cooking temperatures without smoking, but the final dish will lack traditional dairy depth.

Use equal weight; heat to smoking point and cool slightly before cooking, bearing in mind it introduces an assertive, pungent edge.

Use 100% of the weight. Many commercial gram flours are milled from split peas; performs identically in pakora batters and kadhi.

For crisping batters or binding cutlets: use 50% to 60% of the weight. Produces a very crisp shell but lacks the earthy, roasted nutty flavour of besan.

Use about 60–70% of the weight for thickening; for coatings use the same weight but the crust is denser.

Use the same weight for coatings; contains gluten, browns faster and is less crisp.

Use the same weight for crisp coatings; coarser texture and needs a short rest.

Use 100% of the weight. Provides direct, sharp heat and red colour in equal measure.

Use 150% to 200% of the weight if matching colour, but add a pinch of black pepper or hot chilli if you need equivalent fiery heat.

Use 75% to 100% of the weight. Offers a sharp, clean heat with slightly less earthy depth and less crimson colour.

Use 10 to 15% of the weight (about 1/4 teaspoon per chilli); imparts dry pungent heat and reddens the dish without the grassy crunch.

Use 1 dried pod per fresh green chilli; snap in half and temper in hot oil for a deeper, toastier heat.

Use equal weight. Sauté in hot fat until the raw allium smell disappears; slightly wetter, but provides identical warmth and pungency.

Use 20% to 25% of the weight (1 g for every 4 to 5 g fresh). Stir into the gravy; adds peppery heat and warmth, though it misses the crisp, zesty kick of raw root.

Fry 1 bay leaf for every 5 curry leaves in hot oil; imparts a warm, woodsy background note, but misses the citrus-sulphury punch entirely.

Add a small squeeze (about 5 ml per sprig of curry leaves) right before serving; provides sharp citrus top notes without the toasty, herbal aroma.

Use equal weight finely chopped; this is the exact same fresh herb.

Use half the weight finely chopped; provides vibrant green freshness, though the flavour profile becomes noticeably cooler and sharper.

Use 100% of the weight. Soak in boiling water and slip off skins before frying or grinding; gives a lighter, slightly less sweet richness to curries.

Use 60% of the weight for gravies. Soak in warm water and grind into a fine paste to thicken royal kormas without adding heavy oiliness.

Use 100% of the weight. Roast, skin, and grind; creates a thicker, earthier texture typical of Maharashtrian and western Indian curries.

Use 1:1 by weight. Handles high-heat frying identically and introduces a very subtle, pleasant nuttiness.

Use 1:1 by weight. Yields a much richer, authentic aroma and a glossy, heavier mouthfeel.

Use 1:1 by weight. Heat until smoking, then cool slightly before cooking to temper its intensely pungent, sharp mustard kick.