How to replace your steam tip

This quick and easy tutorial will guide you through the process of replacing the steam tip on your Decent Espresso machine.

In this video, you'll learn:

The tools you'll need for the job.

How to safely remove the old steam tip.

Important checks before installing the new tip.

How to securely install the new steam tip.

1. 00:04 Tools needed for the replacement.

2. 00:10 How to unscrew the steam tip.

3. 00:19 Using a spoon or butter knife to prevent the tube from being pulled out.

4. 00:30 Checking the O-rings before installation.

5. 00:36 How to screw the new steam tip onto the wand.

If you have any questions during the replacement process, please feel free to reach out to us at Decent Espresso.

Comfort grip gloves

Spoon or butter knife

1. Wear comfort grip gloves to protect your hands and improve grip friction.

2. Ensure the machine is turned off and completely cooled down before starting.

1. Unscrew the steam tip counterclockwise until it is fully released from the threads.

2. Gently press a spoon or butter knife against the tube inside the wand to prevent it from being pulled out.

3. Carefully pull the steam tip completely off the wand.

1. Before installing the new steam tip, check that both O-rings are properly seated and installed on the wand.

2. Align the new steam tip with the end of the wand.

3. Screw the steam tip tightly clockwise onto the end of the wand, holding the wand securely if necessary during installation.

Should any questions or problems arise during the process, feel free to contact our online tech support.

Older:

mirjam created 2026/05/28, mirjam updated 2026/05/29